16 mC cm-2 was also observed, which was about 106.5 and 1.6 times higher than that of Ti/Pt and PDA/PtNW electrodes, respectively. In addition to that, significant photocurrent polarization responses were presented for PDA/TiO2/PtNW electrodes with a stable current of -136.1 μA, exhibiting excellent charge transfer and UV absorption capacities. This co-deposition method has demonstrated great potential to speed up the polymerization process and enhance the electrical performance for flexible electrodes.In a conventional lithium-ion battery (LIB), graphite forms the negative electrode or anode. Although Na is considered one of the most attractive alternatives to Li, achieving reversible Na intercalation within graphitic materials under ambient conditions remains a challenge. More efficient carbonaceous anode materials are desired for developing advanced LIBs and beyond Li-ion battery technologies. We hypothesized that two-dimensional materials with distinct surface electronic properties create conditions for ion insertion into few-layer graphene (FLG) anodes. This is because modification of the electrode/electrolyte interface potentially modifies the energetics and mechanisms of ion intercalation in the thin bulk of FLG. Through first-principles calculations; we show that the electronic, structural, and thermodynamic properties of FLG anodes can be fine-tuned by a covalent heteroatom substitution at the uppermost layer of the FLG electrode, or by interfacing FLG with a single-side fluorinated graphene or a Janus-type hydrofluorographene monolayer. When suitably interfaced with the 2D surface modifier, FLG exhibits favorable thermodynamics for the Li+, Na+, and K+ intercalation. Remarkably, the reversible binding of Na within carbon layers becomes thermodynamically allowed, and a large storage capacity can be achieved for the Na intercalated modified FLG anodes. The origin of charge-transfer promoted electronic tunability of modified FLGs is rationalized by various theoretical methods.Although metal-organic frameworks (MOFs) have been reported as important porous materials for the potential utility in metal ion separation, coordinating the functionality, structure, and component of MOFs remains a great challenge. Herein, a series of anionic rare earth MOFs (RE-MOFs) were synthesized via a solvothermal template reaction and for the first time explored for uranium(VI) capture from an acidic medium. The unusually high extraction capacity of UO22+ (e.g., 538 mg U per g of Y-MOF) was achieved through ion-exchange with the concomitant release of Me2NH2+, during which the uranium(VI) extraction in the series of isostructural RE-MOFs was found to be highly sensitive to the ionic radii of the metal nodes. That is, the uranium(VI) adsorption capacities continuously increased as the ionic radii decreased. In-depth mechanism insight was obtained from molecular dynamics simulations, suggesting that both the accessible pore volume of the MOFs and hydrogen-bonding interactions contribute to the strong periodic tendency of uranium(VI) extraction.Next-generation electronics (e.g., substrate and conductor) need to be high performance, multifunctional, and environmentally friendly. Here, we report the creation of a fully wood-based flexible electronics circuit meeting these requirements, where the substrate, a strong, flexible and transparent wood film, is printed with a lignin-derived carbon nanofibers conductive ink. The wood film fabrication involves extensive removal of lignin and hemicellulose to tailor the nanostructure of the material followed by collapsing of the cell walls. This process preserves the original alignment of the cellulose nanofibers and promotes their binding. The film is flexible, yet strong in fiber direction with a Young's modulus and a tensile strength of 49.9 GPa and 469.9 MPa, respectively. Furthermore, a sustainable and bio-based conductive ink is formulated with lignin-derived carbon nanofibers. The bio-based ink is printed on transparent wood film, and a strain sensor application of the printed circuit is demonstrated. https://www.selleckchem.com/products/adt-007.html Combining the transparent wood film with the conductive ink produces environmental friendly and sustainable wood-based electronics for potential applications such as flexible circuits and sensors. Moreover, we envision the potential for a scalable and continuous fabrication process as well as end-of-life recyclability.Sodium-ion batteries (SIBs) are recognized as attractive alternatives for grid-scale electrochemical energy storage applications. Transition metal oxide cathodes represent one of the most dynamic materials for industrialization among the various cathodes for SIBs. Here, a cation-doped cathode Na0.44Mn0.89Ti0.11O2 with a tunnel structure is introduced, which undergoes a lowered volume change of only 5.26% during the Na+ insertion/extraction process. Moreover, the average Na+ diffusion coefficients are enhanced by more than 3-fold upon the doping of the Ti cation. The obtained cathode delivers a practically usable capacity of 119 mAh g-1 at 0.1 C as well as an enhanced discharge capacity of 96 mAh g-1 at 5 C. Durability is demonstrated by the retained 71 mAh g-1 after 1000 cycles, corresponding to a capacity retention of 74%. This work demonstrates that the reticular Na0.44Mn0.89Ti0.11O2 is a promising ultrastable cathode material for the development of long-life sodium-ion batteries.Heteromolecular bilayers of π-conjugated organic molecules on metals, considered as model systems for more complex thin film heterostructures, are investigated with respect to their structural and electronic properties. By exploring the influence of the organic-metal interaction strength in bilayer systems, we determine the molecular arrangement in the physisorptive regime for copper-hexadecafluorophthalocyanine (F16CuPc) on Au(111) with intermediate layers of 5,7,12,14-pentacenetetrone and perylene-3,4,9,10-tetracarboxylic diimide. Using the X-ray standing wave technique to distinguish the different molecular layers, we show that these two bilayers are ordered following their deposition sequence. Surprisingly, F16CuPc as the second layer within the heterostructures exhibits an inverted intramolecular distortion compared to its monolayer structure.